HomeTechAbout high tg pcb by CAMTECH PCB

About high tg pcb by CAMTECH PCB

Advanced High Tg PCB Resin Technology

High Tg PCB Specification

Tg means glass transition temperature. There are also many different high Tg PCB materials not listed here, other countries, other companies prefer other materials. If without special notice, we will usually use SYL S1170.

6 layers high TG PCB FR4 with blind holes

Board thickness: 1.6mm

Minimum. Hole diameter: 0.3mm

Minimum. Line Width: 5.0one thousand

Minimum. Line spacing: 4.8one thousand

Surface treatment: immersion gold

Were they from high TG materials??

Access to high TG materials lies in the fact that it is possible to increase the long-term operating temperature and therefore also higher currents by CAMTECH PCB. Constant operating temperature is the temperature at which the PCB can be operated continuously without damage. Gold-plated, usually TÜV is about 20 °C below the indicated TG. This difference should serve as a defense because it means that loading the TG will definitely cause the PCB to break.

The High-TG material definitely feels like “special technology”. In the automotive industry, this material is in demand due to its higher heat resistance – with increasing authorizations and ever-increasing settings. TG around 130°C is the lowest limit for FR4 materials today, but many multilayers will become TG150°C. Glass Transition Temperature The temperature at which the material first softens as the glass fabric softens.

It is the high TG material that is said to be practically TG 170°C. This high TG material up to TG170°C becomes like a normal epoxy based FR4 and what it should be like a normal PCB. An exception in the process is the parameter drilling because the material contains special fillers. High TG material can be taken care of, take care of one eye and take care of more.

What about the rights to order high TG materials?

At CAMTECH PCB, we provide one-stop PCB assembly solutions for all types of requirements related to high quality PCB manufacturing and PCB assembly. and/or environments..

Our customers often have questions about the temperature requirements for the PCB assembly process itself and whether a specific material selection is required for the assembly of a lead-free PCB.

High TG PCB Fabrication and Manufacturing Capabilities

CAMTECH PCB Technology can produce high Tg PCBs with Tg values ​​up to 180°C.

The following table lists some of our most commonly used materials for high temperature printed circuit boards.

TG material

(DSC, °C) Td
(Wt., °C) CTE-z
(ppm / °C) Td260
(Minimum) Td288
(Minimum)
S1141 (FR4) 175 300 55 8 /
S1000-2M (FR4) 180 345 45 60 20
IT180 180 345 45 60 20
Rogers 4350B 280 390 50 / /

You can refer to our direct relationship table as a guide:

Material TG TÜV
Standard FR4 TG 130°C 110°C.
FR4 medium TG 150°C 130°C.
FR4 high TG 170°C 150°C.
Polyimide material with ultra high TG 250°C 230°C.

The properties of high Tg materials are listed below.:

Higher temperature resistance
Decrease Z-axis CTE
Excellent temperature resistance
High resistance to temperature extremes
Exceptional reliability PTH
Pcbway offers some popular high tg materials.
S1000-2 & S1170: Shengyi materials
IT-180A: ITEQ material
TU768: TUC material

PCB material types

There are many types of high tg pcb materials, each board specification is different, its material, price, parameters, etc. also different.

From low to high score:

The details are as follows:

94HB: ordinary cardboard, no flame retardant (lowest material, punched, can’t make PCB power).

94V0: Flame retardant cardboard (punched).

22F: Single sided fiberglass plate (punched holes).

CEM-1: single fiberglass plate (must be computer-drilled, holes cannot be punched).

  1. There are four types of flame retardant quality: 94V-0 / V-1 / V-2/94-HB
  2. Prepreg: 1080 = 0.0712 mm, 2116 = 0.1143 mm, 7628 = 0.1778 mm.
  3. FR4, CEM-3 are all for material type, FR4 is fiberglass and CEM3 is composite substrate..
  4. Halogen-free is a substrate that does not contain halogen. (elements such as fluorine and iodine), since bromine releases toxic gases when burned, it is not harmful to the environment.
  5. Tg – glass transition temperature, namely the melting point.

CAMTECH PCB has been a professional PCB manufacturer for many years, can provide customers with PCBs for most types of PCBs from one source, just contact us freely.

We are one of the leading manufacturers specialized in FR4 PCB. If you’re interested in our high TG fr4 board PCB solution, please be free to contact our factory. We are confident that we can offer you the best quality products on time and excellent service from one source.
Hot Tags: High TG fr4 board PCB solution, CAMTECH PCB manufacturer, production

 

abdullahbaloch
I am Abdullah! a Blogger and an Entrepreneur by passion. I love technology in my day to day life and loves writing Tech Articles on Latest Technology, Cyber Security, Internet Security, SEO and Digital Marketing Fashion, Lifestyle and News. Have a look at the below sites for admin post. Greenrecord.co.uk Realitypaper.com googdesk.com Thetechrim.com timebusinessnews.com latestblogpost.com Amirarticles.com Contact me at below mail id: [email protected]

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Must Read